KR Tray Sizes
tray external dimensions
There are TWO sizes of KR trays, the standard tray at 380mm x 255mm, and the half tray at 190mm x 255mm.
All KR foam trays are available in 6 compartment depths: 10mm, 23mm, 32mm, 51mm, 70mm and 110mm.
All of our foam trays are available in 6 compartment depths: 10mm, 23mm, 32mm, 51mm, 70mm and 110mm.
The F-format trays have the largest compartment size for figure storage of any comparable system, at 53mm x 30mm (LxW)
The N-format are comparable to many on the market at 50mm x 25mm (LxW)
The M-format are ideal for 20-28mm figures at 40mm x 25mm (LxW)
The card trays are 53mm x 30mm x 35mm (LxWxD)
To demonstrate the compartment size the pics on the left show a standard 28mm pirate figure in the F-format and the N-format trays. Many thanks to Black
Cat Bases for the Pirate!
KR core tray formats
There are SEVEN formats of core trays as listed here:
F-format (36 compartments)
N-format (40 compartments)
M-format (50 compartments)
0-format (49 compartments)
V-format segmented pick&pluck (6 rows, 30mm wide with 10mm walls)
D-format segmented pick&pluck (5 rows, 40mm wide with 10mm walls)
J-format segmented pick&pluck (4 rows, 50mm wide with 10mm walls)
Printouts are available of the core trays from the
tray printouts page.
KR pick&pluck trays
The KR pick&pluck trays are segmented, again a feature uniquely designed for the KR Multicase, which enables you to easily customise your trays and provide
optimum support and space usage for your miniatures.
The segmented pick&pluck trays are available in 3 formats, each suits larger vehicles and monsters. The 3 formats suit a wide range of vehicles, monsters
and figures on all larger bases, as well as unbased. There are 1:1 scale printouts available from the
tray printouts page.
which you can use to help decide
which would suit your needs best, but if stuck just email us for advice.
KR custom trays
The custom trays are created for specific figures and vehicles and you can find them on the
custom trays page.
KR 610 trays
The KR 610 range of trays is designed specifically for the 6-10mm scale armies. They use the same principle of the core tray formats, but in 10mm compartment
depth. These trays fit 5 to a case and have a reiniforced base plus tabs to help lifting the trays in and out of case.
Click here to see the range of 610 trays.
KR railway trays
The KR 610 range of railway trays is designed specifically for N-Gaugue and OO-Gauge locos, coaches and wagons. They combine the soft high tensile
KR foam for protection of the models, along with a supportive card exterior and handles to assist getting the trays in and out of a case.
Click here to see the range of railway trays.