GW Spare Trays

the complete storage and transport system

Spare 360x265mm (GW) trays

Got a case that you want new and improved trays for?

Read on, our 360x265mm trays - will fit in a GW size case !

Compared to the standard GW or similar tray set, you can store up to 160 figures in a GW or similar size case using our four tray set -with same size compartments as your current trays!

Our KR FOUR tray set replaces the 3 tray set you have now with no loss of individual compartment size (see below for a comparison).

Compartment Sizes

To show the compartments sizes of these 2 tray sets compared to that in a GW or similar tray take a look at the rotating pictures showing the foam removed to make our tray compartments (in blue) in comparison to the that from a GW or similar tray (in grey)

The block shown here is from our GWN3T which as you can see is the same length and width as the grey foam but is 7mm deeper.

This means space marines, sci-fi figures , and other bulky figures fit more easily. That combined with our 40 (instead of 36) compartment tray means that you can store 120 figures using a GWN3S tray set in your current case !

The block shown here is from our GWN4T which as you can see is the same size as the grey foam. This gives your the opportunity to store up to 160 figures using a GWN4S tray set in your current case !

Scroll down to see the full range and prices of spare trays and tray sets

Remember that our prices include postage - nothing extra to pay!

...and note that all our spare trays come with a cover pad, no need to pay extra for one!

These trays can replace the trays in the GW single or double cases and will suit the following figures and vehicles, though the list is not exhaustive!

GWN4T - any figures on 25mm bases

GWN3T - larger or well armed figures on 25mm bases

GWN2T - tall figures on 25mm bases

GWN5T - terminators, ogres etc (remove a dividing wall)

GWV1T - largest vehicles (eg 4 drop pods or 2 baneblades)

GWV2T - 24 bikes, 24 cavalry

GWV3T - banner bearers

GWV4T - smallest figures

GWV5T - vehicles (eg 2 landraiders plus 4 dreadnoughts) or (8 rhinos) or (4 vindicators) etc

Click Here

40 comp’ GW trays

Click Here

GW size tray SETS

GW size pick&pluck

Click Here

GW 40 compartment single trays

GWN5T

Single foam tray and pad. This provides 40 compartments 70mm deep. Ideal for figures needing extra depth, or remove the diving walls to create compartments 50x60mm - ideal for taller 40mm based models such as ogres, cavalry with pikes etc.

GWN3T

Single foam tray and pad. This provides 40 compartments 32mm deep - a compartment much deeper than a standard GW tray, but still replaces the GW tray in external size !

GWN2T

Single foam tray and pad. This provides 40 compartments 51mm deep. Ideal for figures needing extra depth, or remove the diving walls to create compartments 50x60mm - ideal for 40mm based models such as terminators, ogres, cavalry etc.

GWN4T

Single foam tray and pad. This provides 40 compartments 23mm deep - the same size compartment as the standard GW tray

GW tray SETS for 1 case

GWV5S

Tray set of V5 and N3 foam trays and pad. This provides a segmented pick&pluck tray 70mm deep, (ideal for vehicles, dreadnoughts etc) and room for 40 troops in the top tray.

GWN4S

FOUR 40 compartment trays This provides 160 compartments 23mm deep - store 50% more figures in a standard GW case with the same compartment size!

GWN3S

Three foam trays and pad. This provides 120 compartments 32mm deep. Store 120 figures in a GW case in compartments much deeper than in standard GW trays.

GWV9S

Tray set of V2 and 2x N4 foam trays and pad. This provides a segmented pick&pluck tray 51mm deep, (ideal for vehicles, dreadnoughts etc) and room for 80 troops in the top 2 trays.

GWN9S

Tray set of N2 and 2x N4 foam trays and pad. This provides a segmented pick&pluck tray 51mm deep, (ideal for vehicles, dreadnoughts etc) and room for 80 troops in the top 2 trays.

GWV1T

Single foam tray and pad. This provides a segmented pick&pluck tray, 110mm deep, ideal for large vehicles(eg 2 baneblades!) or monsters.

GW segmented pick&pluck trays

GWV3T

Single foam tray and pad. This provides a segmented pick&pluck tray, 32mm deep, ideal for bulkier figures. 3 of these fit in a GW size case.

GWV2T

Single foam tray and pad. This provides a segmented pick&pluck tray, 51mm deep, ideal for bikes, terminators and similar. 2 of these trays fit in one case.

GWV4T

Single foam tray and pad. This provides a segmented pick&pluck tray, 23mm deep, ideal for smaller figures 4 of these trays fit in a GW size case.

GWV5T

Single foam tray and pad. This provides a segmented pick&pluck tray, 70mm deep, ideal for vehicles, dreadnoughts, etc 1 of these fits in a GW size case, with room for a standard 40 compartment tray on top.